Back / Wine Fridges
Back / Wine Fridges / Bottle Capacity
Back / Wine Fridges / Built-In Width
Back / Beverage Fridges
Back / Beverage Fridges / Can Capacity
Back / Beverage Fridges / Built-in Width
Back / Ice Makers
Back / Ice Makers / Daily Ice Production
Back / Ice Makers / Shop by Color
Back / Cooling
Back / Cooling / Room Coverage
Back / Cooling / BTU Rating
Back / Heating
Back / Heating / Heating Coverage
Back / Articles & Videos
Back / Articles & Videos / Buying Guides
Back / Articles & Videos / Outdoor Living Articles
Pay Per Month
Whether you work on cars in your garage or run a business out of a large warehouse space, utility buildings get hot. Bring down the temperature and improve air circulation with an industrial wall mount fan that works just as hard as you do. The 18-inch WindPro18W features a completely enclosed sealed metal motor housing so you don’t have to worry about sawdust and other particles shortening the life of your high velocity fan. Powerful blades cut through the air with ease for maximum wind speed.
WindPro18W English Product Manual
WindPro18W French Product Manual
The dual ball bearing motor is an energy-efficient choice that promises years of hard work. These motors were built to last far longer than those of competitors. The motor of this wall mount shop fan also delivers air flow that clocks in at 3,000 CFMs on the top setting for the most powerful climate control around. Low, medium and high settings allow you to tone it down as desired.
The WindPro18W industrial wall mounted shop fan is a cinch to use, thanks to its thoughtful design. The slim shape saves space while delivering the same cooling power as larger industrial models, and reduced vibrations mean a smoother ride for your workspace. The tilt bar adjusts the fan to any angle with the turn of a few nuts, so it’s a snap to adjust the air direction and fan speed settings.
The WindPro18W high velocity fan has an ultra-safe design that makes it the best fan for garage and residential uses, even though it's built for business. The seal motor housing over the fan blades keeps both child and adult fingers away from the blades so you never have to worry about an accident, and the convenient pull cord allows you to change fan speeds without reaching behind the motor. This is an ETL-certified product.
The WindPro18W high velocity ceiling fan can be mounted to a variety of walls, including cement, studs behind drywall, masonry or steel beams. This NewAir high velocity wall mounted fan comes with heavy-duty screws for the inline controller, and the owner’s manual contains thorough recommendations for mounting hardware for the main unit that are appropriate for your walls. This top-rated high velocity fan will keep you cool and comfortable for years to come.
1. Dual Ball Bearing Motor Offers Power and Durability
2. Industrial Power Meets User-Friendly Design
3. Packed with Safety Features
4. Easy to Mount on Many Walls
WARNING: This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information click here.
What is a high velocity fan and how does it work?
High-velocity fans are industrial strength fans that typically come with strong metal blades and a ball bearing motor, making them more powerful and durable than a normal indoor ceiling fan. The CFM—airflow efficiency—of a high-velocity fan is much higher than a typical ceiling fan or desk fan, which means it can cool are larger area of square footage. The NewAir WindowPro18W high velocity fan delivers 3,000 CFMs of power to your patio or workshop.
What features make a high velocity fan best for you?
The best high velocity fan for you depends on where you plan on using it. There are three types of high velocity fans: wall-mounted fan, floor fan, or dual floor fan and wall-mounted. Is the amount of available floor space in your garage or shop limited? Do you want to keep your high velocity fan out of high traffic foot areas in your company warehouse? If you answered yes to either of these questions, then consider a wall mounted high velocity fan you can easily install in your home or workshop.
Frequently Asked Questions
How noisy is this fan?
Any high-powered industrial fan will be louder than a residential box fan. Because the WindPro18W wall mounted shop fan is designed to be used in shops, garages and warehouses, we prioritized power. That being said, our high-quality metal fan blades are much quieter than plastic ones, and the motor is designed to reduce vibrations.
Does the fan come with mounting hardware?
The NewAir industrial wall mount fan comes with two heavy-duty screws to secure the inline controller component. However, you'll need to purchase the appropriate mounting hardware for your wall type at a local hardware store. Consult manual for details.
Can this fan be used outside?
Yes, the WindPro18W high velocity fan can be used outside. It has a seal housed motor that is protected from any debris or dust. We do however recommend not using it in the rain.
Does it come with a remote?
No, the NewAir large cooling fan does not come with a remote.
How easy is it to clean?
Very easy to clean. Simply remove the front housing by removing the clasps that hold it together and wipe the blades with a damp cloth.
FAST & DISCOUNTED SHIPPING*
Enjoy discounted & fast shipping! Most orders placed before 1:00pm PST will be shipped on the same business day. Orders placed after 1:00pm PST will be shipped the following business day.
ONE YEAR WARRANTY
Exclusive one year warranty on all new products purchased from newair.com! During the first year, any components of this appliance found to be defective due to materials or workmanship will be repaired or replaced, at the manufacturer's discretion, at no charge to the original purchaser. Visit our warranty page for more details.
30 DAY MONEY BACK GUARANTEE
Customer satisfaction is our goal, so we offer a simple, no-hassle 30 day policy. Visit our Returns Page for more information on how to return an item.